InovaPrint parameters
Print parameters for -->
InovaPrint model
opaquePlus, Xtra, modeldie, gingiva
opaquePlus, Xtra, modeldie, gingiva
InovaPrint wax
Cleaning
Print parameters for -->
1) Choose your resin first
2) Find your printer
3) Take our parameter recommendation from the table
InovaPrint model
opaquePlus, Xtra, modeldie, gingiva
opaquePlus, Xtra, modeldie, gingiva
Wähle das gewünschte InovaPrint Resin in den Einstellungen der Alpha AI-Software
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) | LED POWER |
| 0.100 | 5,0 – 6,0 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0,070 | 4,5 – 5,5 | 4 | 45 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0.050 | 4,0 – 5,0 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 7,0 – 8,0 | 4 | 35 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0,070 | 6,5 – 7,5 | 4 | 30 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 5,5 – 6,5 | 4 | 25 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 19,0 – 22,0 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 17,0 – 20,0 | 4 | 110 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 15,0 – 18,0 | 4 | 100 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 6,0 – 7,0 | 4 | 30 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 4,5 – 5,5 | 4 | 25 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 3,5 – 4,5 | 4 | 20 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
InovaPrint wax
Wähle das gewünschte InovaPrint Resin in den Einstellungen der Alpha AI-Software
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) | LED POWER |
| 0.100 | 6,0 – 7,0 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0,070 | 5,0 – 6,0 | 4 | 45 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0.050 | 4,5– 5,5 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 5,0 – 6,0 | 4 | 35 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0,070 | 4,5 – 5,5 | 4 | 30 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 4,0 – 5,0 | 4 | 25 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 14,0 – 15,0 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 12,0 – 13,0 | 4 | 110 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 10,0 – 11,0 | 4 | 100 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 4,0 – 5,0 | 4 | 30 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 3,0 – 4,0 | 4 | 25 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 2,5 – 3,0 | 4 | 20 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
Cleaning
- Choose your resin first
- Find your printer
- Take our parameter recommendation from the table
Ackuretta SOL
InovaPrint print parameters for Ackuretta soon available in the Alpha AI software settings.
Anycubic Photon Mono 4K
| Layer Thickness (mm) | Exposure time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting distance (mm) | Bottom lift speed (mm/min) | Lifting speed (mm/min) | Retraction speed (mm/min) | LED POWER |
| 0.100 | 5,0 – 6,0 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0,070 | 4,5 – 5,5 | 4 | 45 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0.050 | 4,0 – 5,0 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
Elegoo Mars 3
| Layer Thickness (mm) | Exposure time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting distance (mm) | Bottom lift speed (mm/min) | Lifting speed (mm/min) | Retraction speed (mm/min) |
| 0.100 | 7,0 – 8,0 | 4 | 35 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0,070 | 6,5 – 7,5 | 4 | 30 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 5,5 – 6,5 | 4 | 25 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
Creality LD-002R
| Layer Thickness (mm) | Exposure time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting distance (mm) | Bottom lift speed (mm/min) | Lifting speed (mm/min) | Retraction speed (mm/min) |
| 0.100 | 19,0 – 22,0 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 17,0 – 20,0 | 4 | 110 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 15,0 – 18,0 | 4 | 100 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
Phrozen Sonic Mini 8K
| Layer Thickness (mm) | Exposure time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting distance (mm) | Bottom lift speed (mm/min) | Lifting speed (mm/min) | Retraction speed (mm/min) |
| 0.100 | 6,0 – 7,0 | 4 | 30 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 4,5 – 5,5 | 4 | 25 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 3,5 – 4,5 | 4 | 20 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
Ackuretta SOL
InovaPrint print parameters for Ackuretta soon available in the Alpha AI software settings.
Anycubic Photon Mono 4K
| Layer Thickness (mm) | Exposure time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting distance (mm) | Bottom lift speed (mm/min) | Lifting speed (mm/min) | Retraction speed (mm/min) | LED POWER |
| 0.100 | 6,0 – 7,0 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0,070 | 5,0 – 6,0 | 4 | 45 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0.050 | 4,5 – 5,5 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
Elegoo Mars 3
| Layer Thickness (mm) | Exposure time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting distance (mm) | Bottom lift speed (mm/min) | Lifting speed (mm/min) | Retraction speed (mm/min) |
| 0.100 | 5,0 – 6,0 | 4 | 35 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0,070 | 4,5 -5,5 | 4 | 30 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 4,0 – 5,0 | 4 | 25 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
Creality LD-002R
| Layer Thickness (mm) | Exposure time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting distance (mm) | Bottom lift speed (mm/min) | Lifting speed (mm/min) | Retraction speed (mm/min) |
| 0.100 | 14,0 – 15,0 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 12,0 – 13,0 | 4 | 110 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 10,0 – 11,0 | 4 | 100 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
Phrozen Sonic Mini 8K
| Layer Thickness (mm) | Exposure time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting distance (mm) | Bottom lift speed (mm/min) | Lifting speed (mm/min) | Retraction speed (mm/min) |
| 0.100 | 4,0 – 5,0 | 4 | 30 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 3,0 – 4,0 | 4 | 25 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 2,5 – 3,0 | 4 | 20 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
-
InovaPrint modeldie
58,00 €excl. VAT
plus shipping costs and VAT.
This product has multiple variants. The options may be chosen on the product page -
InovaPrint wax
115,00 €excl. 19% VAT
plus shipping costs and VAT.
-
InovaPrint wash
24,00 € – 99,00 €excl. VAT
plus shipping costs and VAT.
This product has multiple variants. The options may be chosen on the product page
The precision paired with the accurate matte surface of the InovaPrint model Resine absolutely convinced me.
Together with HPdent, I have developed the perfect solution for printed model dies in tooth shade.
Ideal for highly esthetic restorations.
InovaPrint modeldie should not be missed!
Print 'n press guaranteed!
With InovaPrint wax, every press run is a success and the precision is awesome!
