Parametri di InovaPrint
Parametri di stampa per -->
InovaPrint model
opaquePlus, Xtra, modeldie, gingiva
opaquePlus, Xtra, modeldie, gingiva
InovaPrint wax
Pulizia
Parametri di stampa per -->
1) Scegliere la resina InovaPrint desiderata nelle impostazioni del software Alpha AI
2) Trova la tua stampante
3) Prendi il nostro parametro raccomandato dalla tabella
InovaPrint model
opaquePlus, Xtra, modeldie, gingiva
opaquePlus, Xtra, modeldie, gingiva
Wähle das gewünschte InovaPrint Resin in den Einstellungen der Alpha AI-Software
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) | LED POWER |
| 0.100 | 5,0 – 6,0 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0,070 | 4,5 – 5,5 | 4 | 45 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0.050 | 4,0 – 5,0 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 7,0 – 8,0 | 4 | 35 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0,070 | 6,5 – 7,5 | 4 | 30 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 5,5 – 6,5 | 4 | 25 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 19,0 – 22,0 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 17,0 – 20,0 | 4 | 110 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 15,0 – 18,0 | 4 | 100 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 6,0 – 7,0 | 4 | 30 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 4,5 – 5,5 | 4 | 25 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 3,5 – 4,5 | 4 | 20 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
InovaPrint wax
Wähle das gewünschte InovaPrint Resin in den Einstellungen der Alpha AI-Software
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) | LED POWER |
| 0.100 | 6,0 – 7,0 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0,070 | 5,0 – 6,0 | 4 | 45 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0.050 | 4,5– 5,5 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 5,0 – 6,0 | 4 | 35 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0,070 | 4,5 – 5,5 | 4 | 30 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 4,0 – 5,0 | 4 | 25 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 14,0 – 15,0 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 12,0 – 13,0 | 4 | 110 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 10,0 – 11,0 | 4 | 100 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 4,0 – 5,0 | 4 | 30 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 3,0 – 4,0 | 4 | 25 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 2,5 – 3,0 | 4 | 20 | 11,5 | 0 | 10 | 7 | 5 | 40 | 180 |
Pulizia
- Scegli prima la tua resina
- Trova la tua stampante
- Prendi il nostro parametro consigliato dalla tabella
Ackuretta SOL
I parametri per stampare InovaPrint per le stampanti Ackuretta sono presto disponibili nelle impostazioni del software Alpha AI.
Anycubic Photon Mono 4K
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) | LED POWER |
| 0.100 | 5,0 – 6,0 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0,070 | 4,5 – 5,5 | 4 | 45 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0.050 | 4,0 – 5,0 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
Elegoo Mars 3
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 7,0 – 8,0 | 4 | 35 | 1,15 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0,070 | 6,5 – 7,5 | 4 | 30 | 1,15 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 5,5 – 6,5 | 4 | 25 | 1,15 | 0 | 10 | 7 | 5 | 40 | 180 |
Creality LD-002R
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 19,0 – 22,0 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 17,0 – 20,0 | 4 | 110 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 15,0 – 18,0 | 4 | 100 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
Phrozen Sonic Mini 8K
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 6,0 – 7,0 | 4 | 30 | 1,15 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 4,5 – 5,5 | 4 | 25 | 1,15 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 3,5 – 4,5 | 4 | 20 | 1,15 | 0 | 10 | 7 | 5 | 40 | 180 |
Ackuretta SOL
I parametri per stampare InovaPrint per le stampanti Ackuretta sono presto disponibili nelle impostazioni del software Alpha AI.
Anycubic Photon Mono 4K
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) | LED POWER |
| 0.100 | 6,0 – 7,0 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0,070 | 5,0 – 6,0 | 4 | 45 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
| 0.050 | 4,5 – 5,5 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 100% |
Elegoo Mars 3
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 5,0 – 6,0 | 4 | 35 | 1,15 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0,070 | 4,5 -5,5 | 4 | 30 | 1,15 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 4,0 – 5,0 | 4 | 25 | 1,15 | 0 | 10 | 7 | 5 | 40 | 180 |
Creality LD-002R
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 14,0 – 15,0 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 12,0 – 13,0 | 4 | 110 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 10,0 – 11,0 | 4 | 100 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
Phrozen Sonic Mini 8K
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 4,0 – 5,0 | 4 | 30 | 1,15 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.070 | 3,0 – 4,0 | 4 | 25 | 1,15 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 2,5 – 3,0 | 4 | 20 | 1,15 | 0 | 10 | 7 | 5 | 40 | 180 |
-
InovaPrint | model pink
98,00 €excl. 19% VAT
più costi di spedizione e IVA.
-
InovaPrint sep
35,90 € – 69,90 €excl. VAT
più costi di spedizione e IVA.
Questo prodotto ha più varianti. Le opzioni possono essere scelte nella pagina del prodotto -
InovaPrint | model die
58,00 €excl. 19% VAT
più costi di spedizione e IVA.
La precisione abbinata alla superficie opaca accuratamente disegnata del modello InovaPrint Resine mi ha assolutamente convinto.
Insieme a HPdent, ho sviluppato la soluzione perfetta per la stampa di monconi nel colore del dente.
Ideale per restauri altamente estetici.
InovaPrint modeldie è da non perdere!
Print 'n press con garanzia di successo!
Con InovaPrint wax ogni stampa è un successo ed il fit è spettacolare!
